Choose language
Choose language
A snapshot of recent jobs across rope access, boomlift / scissor lift access and scaffold-based roofline protection in Singapore. Each entry shows the access method and the trade it supported.
Installation of a steel cantilever support structure at the head of a glass lift shaft for banner display, using a rope access team in Singapore. Off-site bracket fabrication on a rooftop deck, lifting and bolting to the parapet, then bay-by-bay rope access from the top of the shaft to verify fixing points and rig the banner cables. Facade coordination kept the lift in service and the courtyard accessible.
Repainting works at the Old Hill Street Police Station building in Singapore using a rope access team. Twin-rope work-positioning systems used to refresh the colourful window shutters and surrounding facade elements bay-by-bay, with tethered paint cans and tool tethering throughout. Access was coordinated around the building elevations and the public approach below to keep the work zone clear of pedestrian traffic during shifts.
Banner replacement for the Muslim Convert Association of Singapore (MCAS Darul Arqam). Rope access team on twin-rope work-positioning systems carried out controlled removal of the old banner and installation of the new Zakat "Tapestry of Faith" campaign banner on the external elevation, with banner alignment and edge tensioning from the ropes. Access coordination around the building entrance protected visitor routes throughout the works.
A 12-metre timber scaffold tower erected inside the nave of St Mary of the Angels Church, Bukit Batok, to access and replace a water-damaged ceiling board section. Tower wrapped in debris netting, decked working platforms at multiple tiers, and floor protection laid over the worship area. Scope covered controlled removal of the damaged panel, substrate preparation and reinstatement of the replacement board.
Rope access team mobilised for tenant signage installation on the geometric tiled facade of The Seletar Mall in Singapore. Twin-rope rigging from the parapet, work positioning at the signage panel, and access coordination with a ground-level boomlift for materials and supervision. Rope access supported the lift and fix of large illuminated lettering and logo elements with tool tethering throughout.
Ongoing rope access support for waterproofing and spalling concrete repair across HDB blocks and residential sites in Singapore. Twin-rope access used to reach defect bays on high-rise facades, with safe access planning, bay-by-bay repair sequencing and exclusion zones at ground level. Scope covers spalled concrete removal, rebar treatment and surface waterproofing under each site's permit-to-work and method statement.
Second-unit follow-on to the Ewart Park bungalow roofline protection scope: waterproofed boards installed along the eave and soffit lines to seal gaps against bat droppings on a tiled bungalow roof in Singapore. Mobile aluminium scaffold access, harness and helmet PPE, sequenced bay-by-bay around balcony obstructions. Bungalow maintenance scope covering roofline protection and waterproofed board installation at a residential property.
Work-at-height installation of waterproofed boards along a Singapore bungalow roofline at Ewart Park to seal eave and soffit gaps against bat droppings. Mobile scaffold access, harness and helmet PPE, sequenced bay-by-bay around the tiled roof perimeter. Bungalow maintenance scope covering roofline protection and waterproofed board installation — a practical bat droppings protection measure for residential properties.
Rope access painting on a public-venue structure where scaffold erection would have closed visitor access.
Touch-up painting on a tall public structure executed on twin ropes with tool tethering throughout.
Façade access for cladding inspection and minor glass replacement support on a high-rise building.
Horizontal rope set-up used to reach a wide elevation strip for waterproofing repair support.
Sealant joint replacement and painting touch-up sequenced bay-by-bay to protect finished zones.
Multi-bay façade repair access carried out under the building’s permit-to-work and method statement.
Boomlift-assisted signage installation on a low-rise façade — platform anchor and tool tethering throughout.
Scissor lift access used indoors to replace damaged ceiling boards with platform-rated load and harness anchor.
Rope access route used to reach repeat waterproofing zones across multiple elevations.
Send the building and scope — we will come back with the right access method and a draft method statement.
Contact us